Sandisk U3 Cruzer Micro Usb Device Drivers For Mac

Sandisk U3 Cruzer Micro Usb Device Drivers For Mac

Sandisk U3 Cruzer Micro Usb Device

Plug in the flash drive. Follow these directions:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select the flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Jun 1, 2010 5:45 PM

Sandisk U3 Cruzer Micro Usb Device Drivers For Mac

Sandisk U3 Cruzer Micro Usb Device Drivers For Mac Os X

Cruzer micro usb flash drive

Cruzer Micro Usb Flash Drive

SanDisk Cruzer Micro has the dimensions of 7.94mm x 20.6mm x 57.15mm (D x W x L), and is Hi-Speed USB 2.0 certified with backwards compatibility with all USB 1.1 ports. The flash drive is compatible with Windows 2000 SP4 and XP, however, U3 functionality only supported on Windows 2000 (SP4 and later) & XP OS.

Comments are closed.